MORE STOCK DUE LATE JUNE: SLAM! Pinball Premium Mirror Blades - Super Mirror Silver Stainless Steel

SLAM! Pinball Premium Mirror Blades are made from the highest grade polished mirror stainless steel known as "No.8", "8K" or "super mirror" - a superior reflective mirror compared to lesser makes that are only called "mirror" blades. If it's good enough to bling up the inside of half the hotels in Dubai, it will also make your pinball look like a million bucks!

Supplied in a set of 2, our laser cut mirror blades are easily installed with your chosen combination of two-sided tape, screws, and/or drawing pins. We recommend using double-sided tape in 3 sections along the top, with domed silver drawing pins along the bottom edge (1.5mm holes are pre-cut into the blades) - we offer an optional Fixing Kit which has enough for up to FIVE sets of mirror blades so you probably only need to order one of these kits. For fitting instructions please see our Fixing Kit page.

We do not recommend fixing mirror blades with screws unless you carefully counter-sink the holes in the blades and use countersunk screws as otherwise they are likely to catch on your playfield when you raise and lower it, unlike with our domed drawing pins - however our blades do come with 5mm screw holes cut for if you prefer this method (the holes are below the playfield surface out of sight).

Top Tip: Before ordering check that you can fit a bank or credit card down both sides of your playfield - if it won't fit both sides simultaneously then you won't have enough space for mirror blades unfortunately.

Delivery

Please note that mirror blades require separate special packaging & delivery:

  Mirror Blades incur a separate flat £14.99 charge per UK or EU/Europe delivery. So if you order 2 sets of mirror blades you pay just the one £14.99 delivery charge for them. Delivery is usually by Parcel Force, UPS or DPD. For Other International orders, delivery is by quotation only - please contact us for details.

Material: No.8/8K Super Mirror Polished Silver Stainless Steel
Thickness: 0.7mm
Weight: Approximately 780g